50x236 - 1 Door + 4 Drawer Fronts - Left Hung - Polytec - PAX
← Back to Polytec

50x236 - 1 Door + 4 Drawer Fronts - Left Hung - Polytec - PAX

1. Profile
2. Finish
3. Colour
From $555.00 AUD
Tax included. Shipping calculated at checkout.

Outline Polytec Solid Colour

Specifications

Set includes1 x Door + 4 x Drawer Fronts
FitsIKEA PAX frame 50cm wide x 236cm high (left-hung)
Thickness18mm
ProfileOutline, Linear, Wide V-Groove, Slim V-Groove, Classic Shaker, Fine Shaker, Micro Shaker, Bevel Frame, Reeded, Fine Reeded, Scallop, Plain
FinishPolytec Solid Colour, Polytec Woodmatt

Product details

  • Customea Exclusive. Turn a standard IKEA PAX frame into a built-in style wardrobe with a full-height door above and four drawers below, a layout IKEA doesn't offer.

    • Polytec Solid Colour

    • The Polytec Solid Colour PAX Doors, Drawers & Panels are made from a durable Polytec board in a smooth solid colour that is easy to clean and resists everyday wear. One side is in the Polytec colour of your choosing, the other side is either black or white in a standard finish.

    Polytec Woodmatt

    • The Polytec Woodmatt PAX Doors, Drawers & Panels feature Polytec’s textured Woodmatt surface, a super-matte timber look with a deep woodgrain texture that is warm to the touch and easy to keep clean. One side is in the Woodmatt decor of your choosing, the other side is either black or white in a standard finish.
    • Doors, Drawers and Panels are finished with matching edgebanding. Plinths are not edged.
  • Door comes with hinge holes pre-drilled. Drawer fronts fix onto the IKEA KOMPLEMENT drawer fronts.
  • Not included, buy from IKEA: 1 x PAX frame 50cm wide x 236cm high, 4 x KOMPLEMENT drawers with front (50cm), PAX door hinges.
  • You will also need 20mm screws (6 per drawer front) and 2 clamps to fit the drawer fronts (not included). Handles not included.

    • Installation:

  • 1. Assemble the PAX frame and fit the 4 KOMPLEMENT drawers with their IKEA fronts.
  • 2. Hang the door first using the IKEA hinges and adjust it so it sits level.
  • 3. Work from top to bottom. Clamp the top drawer front to the IKEA drawer leaving a 3mm gap below the door, pre-drill the IKEA front from inside, then fix it through the IKEA front with 20mm screws (6 per front: corners plus centre top and bottom). On routed profiles keep the screws on the flat border and do not over-tighten.
  • 4. Clamp the second drawer front leaving a 3mm gap to the drawer front above, pre-drill and screw, then repeat for the remaining two. The deepest drawer front goes at the bottom.
  • 5. Check all gaps are even and adjust the door if needed.
  • Download the step-by-step installation guide (PDF)

    • Other products in this range