Bespoke Door Builder
Bespoke by Customea
Bespoke Door Builder
Custom-size cabinet doors and drawer fronts, cut to your exact millimetre, for any cabinet brand. Unlock our full finish range including any Dulux, Taubmans or Porter's paint code, double-sided painted options, the complete NAVURBANâ„¢ collection, and extended Laminex and Polytec ranges, colours not available in our standard line.
Your space. Your size. Your finish.
1
Measure
2
Build Your Order
How to Measure Your Doors
All measurements are in millimetres. Do not round. 597mm is 597mm, not 600mm.
↓ Download Measuring Guide PDF
2 pages · Print-friendly
- Remove the door or drawer front from the cabinet.
- Measure the back side of the door, this is the most accurate surface.
- Record Width (W) first, then Height (H), in millimetres.
- Do not round. Enter the exact measurement as shown on your tape measure.
- Repeat for every door and drawer front you're replacing.
TIP, Always measure the back face. The front can have routing or edge detail that skews the reading.
- Measure the outside of the cabinet frame, Width (W) and Height (H).
- Subtract 3mm from both width and height.
- For cabinets with multiple drawer fronts: divide the frame height equally by the number of drawers, then subtract 3mm from each panel's height.
Example, 600 × 800mm frame gives a 597 × 797mm door.
Same frame with 2 drawers gives 597 × 397mm each.
Same frame with 2 drawers gives 597 × 397mm each.
- Measure each panel of the corner door individually.
- Place two separate orders, one for each panel.
- Select No Hinges & Undrilled for both panels.
Note, Corner doors are only available undrilled, without hinges. Drilling must be done on-site.
1
Measure
2
Build Your Order
Build Your Order
Select your profile, finish, and enter your exact measurements below.
Loading configurator…