Plain PAX drawer fronts, Laminex, front view
← Back to IKEA PAX

100cm - 4 Drawer Fronts - Plain - Laminex - PAX - (To Fit 100cm PAX Frame)

1. Profile
2. Finish
3. Colour
From $244.00 AUD
Tax included. Shipping calculated at checkout.

Plain Laminex Natural Finish

Specifications

Set includes4 x Drawer Fronts
FitsIKEA PAX frame 100cm wide (either 236cm or 201cm high)
Thickness18mm
ProfilePlain
FinishLaminex
SurfacesLaminex Natural Finish, Laminex AbsoluteMatte Finish, Laminex AbsoluteGrain Finish

Product details

  • Customea Exclusive. Four drawer fronts for a standard IKEA PAX frame, with no doors, so you can leave the space above the drawers open or shelved.
  • The Laminex Natural Finish fronts have identical board on both sides, and all edges are finished with matching edgebanding.
  • The AbsoluteMatte fronts have one side and the edges in the AbsoluteMatte finish of your choosing, the other side is black, white or grey in a standard melamine finish (pre-set and not selectable).
  • The AbsoluteGrain fronts have identical board on both sides, and all edges are finished with matching edgebanding. On AbsoluteGrain colours the grain runs in a vertical direction. AbsoluteMatte and Natural are solid colours with no grain direction.
  • Choose your surface above, then pick a colour from that surface's own range.
  • Drawer fronts fix onto the IKEA KOMPLEMENT drawer fronts.
  • Not included, buy from IKEA: 1 x PAX frame 100cm wide, 4 x KOMPLEMENT drawers with front (100cm).
  • You will also need 20mm screws (6 per drawer front) and 2 clamps to fit the drawer fronts (not included). Handles not included.

    • Installation:

  • 1. Assemble the PAX frame and fit the 4 KOMPLEMENT drawers with their IKEA fronts.
  • 2. Work from top to bottom. Clamp the top drawer front to the IKEA drawer, pre-drill the IKEA front from inside, then fix it through the IKEA front with 20mm screws (6 per front: corners plus centre top and bottom).
  • 3. Clamp the next drawer front leaving a 3mm gap to the front above, pre-drill and screw, then repeat for the remaining two. The deepest drawer front goes at the bottom.
  • 4. Check all gaps are even.

    • Other products in this range