Plain PAX drawer fronts, Polytec Thermofoil, front view

100cm - 4 Drawer Fronts - Plain - Polytec Thermofoil - PAX - (To Fit 100cm PAX Frame)

Name: 100cm - 4 Drawer Fronts - Plain - Polytec Thermofoil - PAX - (To Fit 100cm PAX Frame)
Brand: Customea
SKU: IKEAPAXWardrobe4DrawerFronts100w-PlainSolidColours
Price: 431.0 AUD
Availability: InStock

1. Profile

2. Finish

3. Colour

From $431.00 AUD

Tax included. Shipping calculated at checkout.

Plain Polytec Smooth

Specifications

Set includes	4 x Drawer Fronts
Fits	IKEA PAX frame 100cm wide (either 236cm or 201cm high)
Thickness	18mm
Profile	Plain
Finish	Polytec Thermofoil
Surfaces	Polytec Smooth, Polytec Woodmatt, Polytec Matt

Product details

Customea Exclusive. Four drawer fronts for a standard IKEA PAX frame, with no doors, so you can leave the space above the drawers open or shelved.

Polytec thermolaminated fronts, 18mm thick in the Plain profile.

Smooth and Matt colours: one side and the edges are in the Polytec thermofoil colour of your choosing, the back side is white in a standard melamine finish (except black and cinder, which are black melamine).

Woodmatt colours: one side and the edges are in the thermofoil colour of your choosing, the back side is in a matching grain colour in a standard melamine finish.

Choose your surface above, then pick a colour from that surface's own range.

Drawer fronts fix onto the IKEA KOMPLEMENT drawer fronts.

Not included, buy from IKEA: 1 x PAX frame 100cm wide, 4 x KOMPLEMENT drawers with front (100cm).

You will also need 20mm screws (6 per drawer front) and 2 clamps to fit the drawer fronts (not included). Handles not included.

Installation:

1. Assemble the PAX frame and fit the 4 KOMPLEMENT drawers with their IKEA fronts.

2. Work from top to bottom. Clamp the top drawer front to the IKEA drawer, pre-drill the IKEA front from inside, then fix it through the IKEA front with 20mm screws (6 per front: corners plus centre top and bottom).

3. Clamp the next drawer front leaving a 3mm gap to the front above, pre-drill and screw, then repeat for the remaining two. The deepest drawer front goes at the bottom.

4. Check all gaps are even.