← Back to IKEA PAX | NAVURBAN™ | SHAKER

Shaker PAX drawer fronts, NAVURBAN veneer, front view

Shaker PAX drawer fronts, NAVURBAN veneer, angled view showing board edge

100cm - 4 Drawer Fronts - Shaker - NAVURBAN - PAX - (To Fit 100cm PAX Frame)

Colour:

Product variants:

Regular price: $660.00 AUD
Sale price: $660.00 AUD
Regular price

Tax included. Shipping calculated at checkout.

Shaker NAVURBAN™

Specifications

Set includes	4 x Drawer Fronts
Fits	IKEA PAX frame 100cm wide (either 236cm or 201cm high)
Thickness	18mm
Profile	Shaker
Finish	NAVURBAN

Product details

Customea Exclusive. Four drawer fronts for a standard IKEA PAX frame, with no doors, so you can leave the space above the drawers open or shelved.

The fronts are NAVURBAN by New Age Veneers, a real timber veneer pressed onto a board and finished in the factory.

Shaker fronts are built as five pieces, a framed border around a centre panel, so the veneer grain is continuous across the face.

Fronts are finished on the face and all edges, the backs are white melamine.

Drawer fronts fix onto the IKEA KOMPLEMENT drawer fronts.

Not included, buy from IKEA: 1 x PAX frame 100cm wide, 4 x KOMPLEMENT drawers with front (100cm).

You will also need 20mm screws (6 per drawer front) and 2 clamps to fit the drawer fronts (not included). Handles not included.

Installation:

1. Assemble the PAX frame and fit the 4 KOMPLEMENT drawers with their IKEA fronts.

2. Work from top to bottom. Clamp the top drawer front to the IKEA drawer, pre-drill the IKEA front from inside, then fix it through the IKEA front with 20mm screws (6 per front: corners plus centre top and bottom). Keep the screws on the flat border and do not over-tighten.

3. Clamp the next drawer front leaving a 3mm gap to the front above, pre-drill and screw, then repeat for the remaining two. The deepest drawer front goes at the bottom.

4. Check all gaps are even.