Anela Marble Handle – Calacatta Viola

Cut from solid natural stone, the Anela is a long, slim 320mm pull that turns a plain door into a feature. Its clean bar profile suits tall pantry and wardrobe doors, integrated fridge panels and long drawer fronts, and every pair carries its own veining, so no two kitchens look the same.

Sold as a pair.

Features

• Solid natural marble
• Long 320mm bar pull with a slim 40mm face
• Three fixing points for a firm, stable hold
• Pairs with the shorter Sora handle in the same stones

Colour

Calacatta Viola: a creamy base with vivid plum veining that moves across every piece.

Also available in Beige Travertine, Rosso Levanto, Bianco Grey.

Specifications

• Length: 320mm
• Width: 40mm
• Depth: 20mm
• Fixing: 3 holes, 96mm apart
• Fixings: M6 threaded inserts; screws supplied in 25mm and 40mm lengths
• Sold as: Pair (2 handles)

Installation

• Stone is cut by hand, so hole positions can vary slightly. Drill the door only once you have the handles in hand.
• Tighten the screws until firm, not overly tight, and fit them by hand rather than with a power tool.

Care

• Marble and travertine are soft and porous, and are supplied unsealed.
• Wipe with a soft, dry microfibre cloth. For marks, use a damp cloth with warm water and a drop of pH-neutral soap, then dry straight away.
• Seal with a stone sealer every 6 to 12 months to repel liquids.
• Avoid vinegar, lemon, glass cleaner, harsh chemicals and abrasive scrubbers, and keep benchtop cleaner spray off the handles.

Natural stone: colour, grain and veining vary from piece to piece, so each handle will differ slightly from the photos.